John Deere Lx277 48c Deck Manual

1. John Deere 48c Manual

Service Mower - 42C, 48C, 54C OMM146413 Issue G1 Lawn Tractors LX266, LX277, LX277AWS, LX279 and LX288 PIN (060001 - ) Service Mower - 42C, 48C, 54C Removing Mower c CAUTION: Avoid injury! Rotating blades are dangerous. Before adjusting or servicing mower: Disconnect spark plug wire(s) to prevent engine from starting accidently. Always wear gloves when handling mower blades or working near blades.

LX277 with 48C Deck 1 AM107423.OIL FILTER 2 AM116304.FUEL FILTER - IN-LINE. • REVIEW John Deere Parts Quality Stories • SEE a complete list of all Home Maintenance Kits. • VIEW Technical (Service) Publications and Operator’s Manuals. John Deere LX277 LX288 LX280 GX GT245 GT235 Lawn Mower 48C Deck Blower Bracket! 48C Mower Deck Operators Manual. Pre-Owned John Deere Manual. Was: Previous Price $9.99. John Deere 48C Mower Deck. John Deere LT160 Mower Deck. John Deere Mower Deck Spindle. John Deere 54 Mower Deck.

Park machine safely. (See Parking Safely in the SAFETY section.) 2.

Put lift lever in the transport position. Turn mower height control knob to '0' position. 54C Mower Only - Rotate all mower wheels to allow mower deck to be rolled outward away from machine: a.

Pull out on pin (A). Rotate mower wheel (B) 90° and align hole in wheel shaft with pin. Release pin to lock mower wheel in rotated position.

C CAUTION: Avoid injury! Lift lever is spring-assisted and may have unexpected movement. Lock the lift lever in forward position before removing or installing the mower. Lock the lift lever in forward position. C CAUTION: Avoid injury!

Belt tension rod is spring-assisted and under tension. Keep a secure grasp on rod at all times while releasing or applying drive belt tension. IMPORTANT: Avoid damage! If equipped, remove tire chains before installing mower to machine to prevent mower damage. Park machine safely. (See Parking Safely in the SAFETY section.) 2.

Put lift lever in the transport position. Turn mower height control knob to '0' position. Slide mower under machine. C CAUTION: Avoid injury! Lift lever is spring-assisted and may have unexpected movement.

Lock the lift lever in forward position before removing or installing the mower. Lock the lift lever in forward position.

Remove drive belt tension rod (H) from bracket (I) and pivot rod as far as possible toward rear wheel to remove all belt tension. Hold tension rod in the released position. Install mower drive belt (J) onto engine drive sheave. C CAUTION: Avoid injury! Drive belt tension rod is spring-assisted and under tension.

Keep a secure grasp on rod at all times while releasing or applying drive belt tension. Pivot the drive belt tension rod toward front of machine to tighten drive belt. Hook tension rod into bracket on mower. 54C Mower Only - Rotate mower wheels to operating position. Adjust the lift assist spring if necessary. Adjust mower level front-to-rear and side-to-side. Adjust mower wheels for desired cutting height.

Adjusting Lift Assist Spring NOTE: The weight of the mower affects ease of lifting. Adjust the lift assist spring for your particular mower deck model. Make sure yellow indicator (A) is aligned with the proper mark for the mower deck model installed. If not, adjust the lift assist spring so the indicator is aligned with the correct mower deck mark. Turn adjusting bolt (B) at front of machine frame to adjust lift assist spring: Clockwise - Increases spring tension and moves indicator toward front of machine for heavier mowers. Counterclockwise - Decreases spring tension and moves indicator toward rear of machine for lighter mowers. Replacing Mower Drive (Primary) Belt 1.

Park machine safely. (See Parking Safely in the SAFETY section). Lock mower deck in the forward position. C CAUTION: Avoid injury! Belt tension rod is spring-assisted and under tension. Keep a secure grasp on rod at all times while releasing or applying drive belt tension.

Remove drive belt tension: a. Grasp and hold tension rod (A) securely. Disengage rod from retaining bracket (B). Move rod as far as possible toward rear wheel to remove all belt tension.

Hold tension rod in the released position. Remove mower drive belt (C) from engine drive sheave and mower drive sheave. Clean belt with a clean cloth. Inspect belt for wear or damage.

Replace as necessary. Install belt on mower sheave and engine sheave. Pivot the drive belt tension rod toward front of machine to tighten drive belt. Hook tension rod into bracket on mower. Replacing Mower Deck (Secondary) Belt 1.

Park machine safely. (See Parking Safely in the SAFETY section).

Remove mower deck. Connect idler spring (B). Make sure open end (D) of the spring hook faces outward on the idler arm. Install belt shields. Install mower to machine. Checking for Bent Mower Blades c CAUTION: Avoid injury! Service mower blades safely: Disconnect spark plug wires or negative (-) battery cable to prevent accidental startup.

Mower blades are sharp. Always wear gloves when handling mower blades or working near blades. Park machine safely. (See Parking Safely in the SAFETY section).

Lock lift lever in forward position. Measure distance (A) between blade tip and flat ground surface. Rotate blade 180° and measure other blade tip.

Install new blade if the difference between the two blade tip measurements is more than 3 mm (1/8 in.). Repeat for all blades.

Servicing Mower Blades c CAUTION: Avoid injury! Service mower blades safely: Disconnect spark plug wires or negative (-) battery cable to prevent accidental startup.

Mower blades are sharp. Always wear gloves when handling mower blades or working near blades. Removing Mower Blades 1. Park machine safely.

Mercury factory manuals. A Material Safety Data Sheet (MSDS) is a form containing data regarding the properties of a particular substance. It is intended to provide workers and. Customers are confident when they buy Mercury®. Mercury Joystick Piloting - the system that allows you to effortlessly move your. Order a manual online.

(See Parking Safely in the SAFETY section.) 2. Raise or remove mower deck.

John Deere 48c Manual

Block mower blade with a piece of wood to prevent it from spinning. Loosen and remove bolt (A), washer (B), and blade (C). Inspect blade condition. Sharpen, balance, or replace blades as necessary. Installing Mower Blades 1.

Make sure deflector cup (D) is seated properly between mower spindle and blade. Position mower blade (C) with cutting edge towards the ground onto the mower spindle. Install blade washer (B) with cup side toward the blade. Install and tighten bolt (A) by hand until mower blade is in full contact (fully seated) with spindle. Block mower blade with a piece of wood to prevent spinning.

Tighten blade bolt: 42C Mower - 75 Nm (55 lb-ft). 48C and 54C Mowers - 68 Nm (50 lb-ft). Repeat for all blades. Sharpening Blades c CAUTION: Avoid injury! Mower blades are dangerous: Always wear gloves while working on blades.

Always wear safety eye protection when grinding. Sharpen blades with grinder, hand file, or electric blade sharpener.